Original Item: Only One Available. This is a fantastic Regimental marked example of a World War One Imperial German Model 1916 Helmet. The stamped, sheet steel construction, helmet retains about 90% of its original hand painted camouflage paint. The helmet has both the dome headed chinstrap retaining rivets, both of the ventilation side lugs and all three of the flat-headed liner retaining rivets.

The interior of the helmet has the early all leather pattern, three pad leather liner with leather retaining band still intact. All three leather pads are complete including the original horsehair stuffing. One liner pad has come apart from the liner ring. Pads are a bit stiff and are still firmly held in place. Three of the six-liner string adjustment tabs are intact. The chinstrap is absent. Shell is marked W.68, indicating manufactured it was manufactured by Hermann Weissenberger & Co, of Stuttgart-Cannstatt size 68 (originally intended to accommodate head sizes of 60cm to 62cm or US 7 1/2 to US 7 3/4).

Inside the on the internal brim is a stenciled regimental marking. There is also a dome stamp. On the inside dome of every WWI German helmet you will find a heating lot code, these codes were used by the factories during production. In many cases the heating lot code will indicate where the steel was milled. These steel mills are called rolling mills. The dome stamp in this helmet is difficult to read but partially clear and we believe reads “2489”.

This helmet offered in fantastic collectible condition, is a perfect addition to any Great War collection.

History of the M16

The Stahlhelm was introduced into regular service during the Verdun campaign in early 1916.

The M1916 design had side-mounted horn-like ventilator lugs which were intended to be support for an additional steel brow plate or Stirnpanzer, which only ever saw limited use by snipers and trench raiding parties, as it was too heavy for general use.

The shell came in different sizes, from 60 to 68, with some size 70s reported. The suspension, or liner, consisted of a headband with three segmented leather pouches, each holding padding materials, and leather or fabric cords could be adjusted to provide a comfortable fit. The one-piece leather chinstrap was attached to the shell by M1891 chinstrap lugs, the same kind used in the Pickelhaube helmet.

The M1916 design provided excellent protection: Reserve Lieutenant Walter Schulze of 8th Company Reserve Infantry Regiment 76 described his combat introduction to the helmet on the Somme, 29 July 1916:

"... suddenly, with a great clanging thud, I was hit on the forehead and knocked flying onto the floor of the trench... a shrapnel bullet had hit my helmet with great violence, without piercing it, but sufficiently hard to dent it. If I had, as had been usual up until a few days previously, been wearing a cap, then the Regiment would have had one more man killed."

But the helmet was not without its flaws. The ventilator horns often let cold air in during the winter, requiring the wearer to block the vents with mud or fabric. The large, flared skirt tended to make it difficult for soldiers to hear, distorting surrounding sounds and creating an echo when the wearer spoke.

Originally painted Feldgrau (field grey), the Stahlhelm was often camouflaged by troops in the field using mud, foliage, cloth covers, and paint. Official issue cloth covers in white and grey appeared in late 1916 and early 1917. Camouflage paint was not formally introduced until July 1918, when German Army Order II, No 91 366, signed by General Erich Ludendorff on 7 July 1918, outlined official standards for helmet camouflage. The order stipulated that helmets should be painted in several colors, separated by a finger-wide black line. The colors should be relevant to the season, such as using green, brown and ocher in summer.

After the effectiveness of the M1916 design was validated during the 1916 campaigns, incremental improvements were subsequently made.